GUHRING 05582 010.000 END MILL SOLID CARBIDE 10.000MM H10 TYPE N FIRE
End mill carbide
See technical informationReferences
Gühring:05582 010.000
Rubix:223A4852
Product details : GUHRING 05582 010.000 END MILL SOLID CARBIDE 10.000MM H10 TYPE N FIRE
Design: Ultra-fine grit solid carbide, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended.
Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 3 x D.Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended.
Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 3 x D.Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.
Ratio end mill RF 100 U standard FIRE 05582 N hard metal mb 10MM
Technical specifications
Attributes
| Diameter | 10 mm |
|---|---|
| Type of tail | ha |
| Tail diameter | 10 mm |
| Number of teeth | 4 |
| Length of cut | 40 mm |
| Total length | 100 mm |
| Centre cut | yes |
| Cutting material | carbide |
| Coating | fire |
| Type | ratio rf 100 u (standard), 4 teeth, center cut, with neck clearance |
| Angle of helix | 38 ° |
| Machining material | steel, cast iron and hardened steel (up to 48 hrc / 1600 n/mm²) |
| Capacity length | 48 mm |
Show UNSPSC/ECL@SS
£ 140.13 excl. VAT
/ Each
£ 168.16 incl. VAT
- Usually arrives within 14 working days